Orthopedic devices for penis enlargement have been used by men for more than a decade and have proven positive. The most common device is called an extender, which is translated from English as expander or filler. This fully reflects its purpose. It is characterized by simplicity of design and assembly, which allows men to use both purchased (factory) and homemade extenders. It is quite easy to make. The most important thing is to have the necessary materials and basic knowledge about the mechanics of the intimate apparatus.
Types and effect of extenders
The device works on the principle of proliferation of cavernous bodies. This happens under the condition of regular tissue tension due to the periodic unwinding of the axis in the direction of increasing length. The growth of new tissues does not stop dividing under the constant influence of the force of distraction.
Average growth rates, according to reviews by users and manufacturers, are an increase in length of 2-5 centimeters in a period of 6 to 10 months. Immediate results should not be expected. Patience and regular use of the extender will be required. Violation of this recommendation will result in not achieving the desired effect.
Depending on the method of attachment, extenders are divided into several types. When you plan to build a home version, you need to understand how they differ from each other.
Vacuum extender
The volume is performed using a special vacuum chamber. It covers the head of the penis by approximately 3-7 centimeters in circumference. It is considered the most reliable and secure. The risk of injury is practically reduced to zero, because there is no risk of compression.
Extender for penis enlargement
Loop and strap extender
The attachment mechanics are almost the same, but the attachment form is different. In the first case, a noose is used, and in the second, a strap. The difference gives these species a significant difference.
The belt is lined with gauze, so the degree of compression is minimal. The loop, on the contrary, can strongly compress the head, disrupting the blood supply to the reproductive organ, but remains the most common option.
How to make an extender with your own hands at home?
You can make any of the three types of devices listed. The most difficult to manufacture will be vacuum due to the fact that you will need to make a chamber. Otherwise, the process will not have significant differences.
Drawings
Make a schematic diagram of the device yourself. To make a drawing, it is enough to study the design of any well-known manufacturer. Based on photos, drawings, videos, they sketch their sketch. The length of the side posts is chosen based on the desired result. It can vary from 20 to 25 centimeters.
Necessary materials and tools
Homemade extender at home is made of the same parts as the factory one. Specific materials depend on the type of structure being assembled:
- The stop ring, straps and loops are in direct contact with the skin and should not cause an allergic reaction. This imposes certain requirements on the material. The ring can be made of thick cardboard, hypoallergenic plastic/plastic without sharp corners. Its inner diameter should be 2-3 mm larger than the width of the cross section of the penis. It is best to use a sterile bandage before use, which is changed every time.
- The slats (side bars) are selected so that they can fix the required length for a long time. These can be matrices, rods, chrome spokes.
- The vacuum chamber and bulb must be sealed. If this condition is not met, then such a homemade product will not work.
The difference between the devices lies in the fastening element. If you decide to make a variety with a camera, you should give preference not to a plastic bottle as some sources say, but to buy a special jar. These are sold in pharmacies. This guarantees the creation of an internal vacuum.
Schematic homemade extender
Step-by-step assembly instructions
The production of a tape or loop involves the following sequence of works:
- A piece with a diameter of 11 cm is cut from a piece of plywood or other material with a thickness of no more than 10 mm. A hole with a diameter of at least 5. 5 cm is made inside the penis.
- The length of the bars is 20-30 cm. They are completely wrapped in plywood, leaving a little on top. The entry points are filled with glue.
- They screw a "lamb" onto each one.
- Strips are cut from a thin metal plate and holes are made in them.
- A clamp made of soft tubes or a strap that can be used as medical wide tourniquets is inserted into the holes.
- Check the reliability of fixation.
Assembly of the vacuum variety differs only in that the pear jar is attached to the end. Not everyone has such a device at home, but it is freely sold in city pharmacies. The radius ranges from 13 to 25 mm. It is selected according to the size of the reproductive organ. The tightness of the clamp is ensured by a rubber sleeve. Its length must be at least 6 cm. It can be made from elastic surgical gloves.
The air will be pumped out thanks to the bulb or hose connector. You can use the tonometer element. The stop valve is unscrewed from it and inserted from the other end. This allows you to change the principle of operation. The pear will begin to pump out, not pump in air. As you can see, you will have to fiddle more than with a strap and loop device.
To help you understand the principle of assembling an extender with your own hands at home, a video will help you, which clearly shows how the elements are connected, as well as what materials they are made of.
Extender for penis enlargement - tied below the knee
How and when to use?
The indication for using the device is the small size of the device (10-12 cm). This length is not a "reference" length. A man decides for himself whether he is satisfied with his reproductive organ or wants to have more of it. To increase the size of the phallus, you must wear a homemade or factory-made device for at least 4-6 hours a day. The design allows you to hideextender under clothes People around you will not notice anything.
Instructions for using the stretcher:
- The circle is placed on a slightly erect penis. The ring should fit well against the pubic bone.
- The foreskin is retracted and a camera, loop or strap is attached to the glans. It is necessary to ensure that the blood flow is not disturbed (no excessive pressure, change in the shade of the integument).
- Adjust the length of the bars. There should be no painful sensations. The parameter is gradually increased, allowing the organ to get used to the degree of tension, that is, the phallus is trained.
When possible, massage the penis every hour. This allows it to quickly adapt to loads. After the scheduled time, the device is removed and the meat is kneaded with special intimate creams. The device is thoroughly disinfected each time and placed in a clean packaging for storage.
Advantages and disadvantages of domestic constructions
The advantages of home carriers include the following parameters:
- the possibility of trying out the stretcher without purchasing the device;
- relative cheapness;
- obtaining a design that fully corresponds to the parameters of the phallus.
The advantages are actually very few. There are several disadvantages. This includes the inconvenience of the product, because it is quite difficult to independently assemble a model that will ideally twist, put on, take off, and not press anywhere and not slip.
Which extender is better - factory or homemade?
To answer this question, it is enough to compare two types of models:
- The domestic product weighs much more than factory models. This leads to the need to adjust the rods for a long time each time so as not to squeeze the head of the penis. Another thing is that it is quite difficult to make a vacuum model. Otherwise, it is usually less efficient than domestic ones with a loop and a strap.
- Cost, which is listed as an advantage, is a relative advantage. Today there are Chinese models, which cost 1-3 thousand rubles. This is no more expensive than a homemade extender. No one will sell half a meter of hairpins or 20 centimeters of textolite. You will have to buy a lot more material that will lie idle. This makes DIY assembly worthwhile only when you already have everything you need.
- The simplified design of the self-assembling device is not an advantage, but a disadvantage, because it will be inconvenient to use. You have to spend a lot of time on dressing and undressing, and considering that self-massage is occasionally recommended, it is also less effective.
One conclusion can be drawn - the factory device is better. To try this method of penis enlargement, you can simply buy a cheap model
What risks can there be when using a homemade device?
Experts and specialists do not recommend that you assemble the extender yourself without the appropriate skills. If the device turns out to be "clumsy", presses, presses, causes discomfort, wearing it is not recommended. This can lead to unpleasant consequences.
Homemade extender
A well-assembled device will not be inferior in efficiency to the factory one. It will only be aesthetically unappealing. Otherwise there will be no difference, but here too there is a nuance. Many users write that with long-term use, hematomas, compactions and irritations form on the dermis.
This may be caused by the low quality of the material. Finding medical silicone in a pharmacy is almost impossible. If one is sold, its properties leave much to be desired, and with prolonged contact, negative consequences begin to appear.